"Duo" shelves made of premium quality solid laminated wood, alternating Indian walnut (or laurel) with beech.
Premium quality (A/B).
thickness 18mm:
blade width: beech, slats of 30 mm +/- 3 mm (only one slat width present at a time),
walnut, 10 mm +/- 3 mm slats (only one slat width present at a time)
Admitted :
- Homogeneous side A, possible presence of small brown spots <1 cm and small sound knots <1 cm
- Side B: small knots diameter < 1 cm. Some traces of brown stains characteristic of beech and traces of red heart, in limited quantities, diameter < 1cm, for walnut: multiple gluing of the boards (see photo).
Not allowed: on both sides faded sapwood and pitting, checking, cracks, machining and jointing defects (sanding marks, blows, etc.), splinters.
Density: 875 k/m3
These tablets are delivered raw and ready to use. A sanding in three times is carried out with grain 80 then 100 and 120 on both sides. The bonding is carried out using a class D3 white glue in accordance with the NF-EN-204 standard and is free of formaldehyde. The quality of the drying of the wood, in an industrial dryer, guarantees our panels a hygrometry rate of the wood of around 8 to 10%. This rate allows great stability of the wood in all interior uses: carpentry and cabinetmaking. Due to the nature of the material itself, Solid Duo tablets may experience slight dimensional variations depending on the environment in which they are located. This is why the dimensions of our shelves may vary within the following limits:
Thickness of plus or minus 1 mm
Width of plus or minus 1 mm
Length of plus or minus 1 mm
The grain of the wood is in the direction of the length of the shelves.
Advice before use: before applying a finish to your product, we advise you to lightly sand it with 80 and/or 120 grain. This will guarantee a very smooth and homogeneous appearance for your wood.
Manufacturing: France
Origin of wood:
India (Indian walnut),
Europe (beech)
Description of the rounded edge: C2: two radii of 5 mm above and below
Solid wood : This tablet is made of solid wood in accordance with decree n°86-583 of March 14, 1986, article 8 specifying that it is "...prohibited to use this designation for wooden elements and panels less than or equal to 5 millimeters. " which is not the case for the solid wood panels sold on our site.
