Rustic rough oak wood sleepers are square-edged pieces (no sharp edges), sawn with “fresh wood”, with a margin of about 5 mm greater than the requested size (cross-section). This margin will reduce as the wood dries.
The oak used for these landscaping sleepers comes from French forests in order to guarantee an eco-friendly and high-quality product.
A landscaping sleeper is, by definition, a rather “rustic” product, which is why it is not suitable for “straight line” decor, but is instead better suited for creating an authentic look for your garden: stairs, low walls, garden borders, garden squares, etc.
Hygrometry rateFresh wood: the wood was not dried and its moisture rate can hence reach 60 to 65%.
Dimensional tolerancesThis natural material is still living, can change in dimensions and can bend or split over time. This phenomenon must therefore be taken into consideration when the product is used. Our tolerance in
Pecularities
Permitted peculiarities:
healthy sapwood permitted on the edges and on one face,
Je n'ai pas encore tout vérifié, mais cela semble conforme
LAURENT09/02/2021Je n'ai pas encore tout vérifié, mais cela semble conforme55
3/5 - Nicolas, le 28/08/2020
Je suis un peu déçu de l'aspect des traverses : elles ont des traces noires (griffes des pinces des fenwick ?) ce qui m'oblige à poncer les faces visibles. Je sais que c'est du bois pour l'extérieur sensé rester brut mais je suis étonné qu'elles soient livrées comme ça et ça fait du travail en plus.
Nicolas28/08/2020Je suis un peu déçu de l'aspect des traverses : elles ont des traces noires (griffes des pinces des fenwick ?) ce qui m'oblige à poncer les faces visibles. Je sais que c'est du bois pour l'extérieur sensé rester brut mais je suis étonné qu'elles soient livrées comme ça et ça fait du travail en plus.35
5/5 - MICHEL, le 22/07/2020
Ce produit est conforme à sa description sur le site et à mes attentes, parfait !
MICHEL22/07/2020Ce produit est conforme à sa description sur le site et à mes attentes, parfait !55
5/5 - Stephane, le 03/06/2020
Parfait
Stephane03/06/2020Parfait55
5/5 - Anne, le 13/05/2020
Très bien.
Anne13/05/2020Très bien.55
jeremie11/05/2020produits conformes a la commande superbe55
Jean28/04/2020produit relativement conforme45
Miguel28/04/2020Traverse paysagère de très grande qualité, vraiment .45
JEAN-MICHEL25/07/2019Bien.45
Bertrand27/05/2019idem ci-dessus : longueurs de 260, comprises entre 256 et 262.45
PASCAL16/05/2019Ces traverses sont comme indiquées sur le site. Pas de mauvaise surprise.55
Frédéric08/05/2019Commande conforme. Très bel aspect.
Livreur très sympathique.55
JEROME28/09/2018Défauts importants sur 3 traverses mais au moins 3 faces sur 4 sont correctes. Cependant, très bon rapport qualité/prix.45
ghislaine23/05/2017Traverses fendues et angles cassés sur la longueur .35
jean29/09/2016le colis étais comme je l'attendais les traverse bien que brute après découpage sont de très bonne qualité
maintenant il me faut juste les poncer et les traiter .55
Frederic02/05/2016Produits conformes55
Olivier06/03/2016Produit rustique mais de bonne qualité et conforme ä la description45
Jean-Luc20/05/2015Je ne pensais pas que les poutres avaient un aspect aussi inégal (vs photo du site)35
Grégory12/03/2015Produit livré conforme à la commande et livré dans les délais55
C1 : Two radii on top and below, for half the thickness of the panel
C2-1 : A 5mm radius on top
C2-2 : A 5mm radius on top and 5mm radius below
C3 : A 5mm radius on top and a 45° bevel below
Warning, this machining option involves a reduction of the surface on the lower part, about :
30 mm for a thickness of 40 mm
28 mm for a thickness of 38 mm
16 mm for a thickness of 26 mm
10 mm for a thickness of 20 mm
8 mm for a thickness of 18 mm
C4-1 : A 4x4mm bevel on top
C4-2 : Two 4x4mm bevels on top and below
Details of available finishes
If you select “None: the product will be delivered without finish. It will be up to you to apply the finish of your choice before use.
BLANCHON Solid’OIL oil-wax: with a single coat, it impregnates, dyes and protects the wood in a single operation. With high resistance, on contact with the wood, it creates an interactive mesh that deeply nourishes and preserves the wood. The application of oil can bring up the bibers of the wood during its drying after leaving our workshop. A simple fine-grained sanding (approx. P150) once our panel is recieved will remove a possible slighltly "rough" appearance. It will be necessary to iron a layer og oil every 6 to 12 months depending on use.
Matt finish.
> Natural Shade: “warms up” the wood, i.e. darkens it slightly.
> Snow Shade: gives a slightly whitened effect, granting a soft and contemporary appearance.