NATURAL ACACIA WOOD TOP

Description

14 customers realizations

Order a sample

Description

Natural quality finger-jointed solid Acacia top designed for the manufacture of custom-made furniture such as tables or desks. Order your custom-made table and desk tops with our sizing service.

If you want specific cutouts like a grommet, etc., go to our Configurator.

Our steamed Acacia office trays are of natural quality, it is an entry-level quality.

Do not forget to apply a finishing product to your tops to effectively protect them from daily aggressions.

This product is subject to the Eco-Furniture Tax

Technical specifications

Types of wood	Acacia
Manufacturing	Finger jointed
Wood range	Natural
Lamella width	30 to 70 mm
Finishing	Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish.
Origin	Vietnam
Gluing	Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free.
Hygrometry rate	8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses.
Dimensional tolerances	Thickness: +/- 1 mm \| Width: +/- 1 mm \| Length: +/- 1 mm
Lamellas direction	Length-wise
Vernacular name	Acacia mangium
Side A (best side)	Presence of healthy sapwood, low quantity of small healthy knots < or = 1.5 cm, puttied or not before sanding Possible presence of insect bites in limited quantities (these traces testify to the presence of insects when the tree was still standing, the insects having been eliminated during the wood drying phases).
Side B (worst side)	Identical to face A
Edges	In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining
Solid wood	This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products.
Wood grain	Straight

Maintenance advices

Storage

Upon receipt, your wood should be stored in a clean and dry location. It wood must be stored flat, without direct contact with the ground (e.g. on brackets). If you have to store several panels, separate each panel with brackets to allow air circulation on all faces.

Finish

The application of a finish is essential to protect your wood. To obtain a professional result, we recommend that you choose the finishing option (availability depending on product). If you wish to apply the finish yourself, refer to the application instructions of the finish product manufacturer.

Cleaning

An oiled finish must be renewed regularly (6 to 12 months depending on the type of product used). A varnished finish should be renewed when it shows signs of wear. Do not allow water to stagnate on the wood. Do not clean with abrasive products. Do not put the wood in contact with hot objects.