Real "Live Edge" panel (with raw edges) of rustic quality oak, bringing a design and natural touch to your interior.
Our "Live Edge" panels are made of 4 to 5 glued lamellas (the number of lamellas depends on the width of the panel), and their edges in the original shape of the tree (the bark has been removed and the edges were sanded).
This Live Edge board can be used as a desk top, as a table top, coffee table, meeting table, etc. It can also be placed vertically against a wall for an original decoration.
Our Live Edge panels are manufactured in France in compliance with sustainable and regulated forest management practices, as certified by the 100% PEFC certification.
Thickness 4 cm, 2 choices for the width : 80 or 100 cm, +/- 5 cm. If you choose a 80 cm wide, it can actually vary between 75 and 85 cm, this is due to the irregular raw edges.
The panel length is made to your measure from 100 to 300 cm.
The raw spirit is the raison d'être of the Live Edge panel. The wood will therefore have certain singularities such as sapwood, uncloged slots, knots, traces of raw wood, and other defects. This will only bring it more charm. However, the edges are sanded in order to bring you the best comfort.
For any use you will need to apply a finishing product such as oil or varnish to our Oak Live Edge panel.
This product is subject to the Eco-Furniture Tax
Types of wood
Vernacular name Quercus pedunculata Ehrh
Manufacturing Edge glued
Wood range Rustic
Lamella width 75 to 220 mm
Side A (best side) Sapwood is only on the edge lamellas (some black stings are allowed in the sapwood and slightly stained sapwood is allowed), non putty knots are allowed any size and number, traces of hearts, cracks and slits are allowed
Side B (worst side) Sapwood is allowed on all lamellas, non putty knots are allowed any size and number, traces of hearts, cracks, some traces of raw wood are accepted
Edges Natural sanded
Lamellas direction Length-wise
Gluing Bonding using a D4 class glue in accordance with NF-EN-204 and without formaldehyde
Hygrometry rate 10% (+/- 2%). Kilm dried quality. This rate allows a high stability of the wood in all interior uses: carpentry and cabinetmaking
Finishing P120 grade sanding on both sides
Dimensional tolerances Thickness: +/- 1 mm, Width: between 75 and 85 cm or between 95 and 105 cm, Custom length +/- 5 mm
Certification PEFC™ 100% - PEFC/10-31-2383
“Solid wood” This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products.
The basic rules of cabinet-making regarding the storage and processing of the panels must be respected in order to preserve the quality of the wood.
Any finish is possible: varnish, oil, wax, or even epoxy resin. For instance epoxy resin is recommended on slots or knots in order to plug the gaps and stabilize the panel. Follow the manufacturer's application advice.
Product reserved for interior use.